Simpro Pricing in Australia: What It Actually Costs
Simpro does not publish a price. This page sets out what is publicly known, what third parties report, and what the implementation fee nobody mentions is likely to add. Checked 29 July 2026.
How much does Simpro cost in Australia?
Simpro publishes no pricing at all. Third-party trackers report roughly $150 to $300 per user each month, but you cannot confirm a figure without contacting sales.
Simpro's Australian pricing page carries no dollar figures. There is no plan table, no per-user rate and no starting-from number. The only route to a price is a sales conversation and a demo.
Independent trackers put the range at roughly $150 to $300 per user per month, with entry-level configurations reported from around $30 per user. Treat those as third-party estimates rather than Simpro's own numbers, because Simpro has not published anything to check them against.
Does Simpro charge an implementation fee?
Reported implementation, migration and training costs run $3,000 to $10,000 for small and medium businesses, and above $20,000 for enterprise rollouts.
This is the part that catches people out. Simpro is not a swipe-your-card-and-start product. Third-party sources report implementation, customisation, data migration and training running from $3,000 to $10,000 for an SMB, and past $20,000 for larger deployments, with a two to three month rollout.
That matters when you compare it to anything advertising a low monthly figure. The monthly number is not the cost of getting live. It never was.
Why is Simpro pricing so hard to find?
Pricing sits behind a sales call because the cost depends on user count, modules and implementation scope, which makes a single published number difficult.
There is a defensible reason for it. Simpro sells into everything from a three-person outfit to a large contracting business, and the cost genuinely does move with user count, module selection and how much migration work is involved.
The trade-off is that you cannot compare it to anything without booking a call first. If you are shortlisting three products on a Sunday night, that is a real cost in your time.
How does Rignite compare on price?
Rignite publishes every figure. Calculate is $2,000 setup plus $97 a month, Automate $4,000 plus $399, Complete $8,500 plus $849.
We charge a setup fee too, and we think that is the honest way to sell this. The difference is that ours is on the page.
Our setup fee is the build: your suppliers, your job types, your margins and your templates, configured and handed over working. Compare it to a Simpro implementation, an automation agency, or a part-time estimator, rather than to a monthly subscription that still needs configuring. Pay annually and you save 20%.
Which one suits your business?
Simpro is broad field-service and job management software. Rignite is narrower and deeper: it automates quoting and estimating specifically, built around your existing process.
These are not the same product. Simpro runs scheduling, job management, inventory and field service across a whole operation. If that is the problem you have, it is a serious tool.
Rignite does one part of the job properly. It takes plans or job details, runs the take-off, chases supplier pricing, writes the scope of works and compiles the quote. If quoting is what is eating your evenings, that is the narrower problem we solve.
What should you ask before signing anything?
Ask for the implementation fee in writing, the per-user rate at your headcount, what migration costs, and what happens to the price when you add a user.
Four questions worth asking any vendor in this category, including us. What is the total first-year cost, not the monthly figure. What does implementation cost and what is included. Is the price per user, per job, or flat. And what happens to that number in twelve months when the team grows.
Any vendor that will not answer those in writing before you sign is telling you something.
Where Rignite fits
Sources and last checked
Simpro Pricing in Australia: What It Actually Costs
Simpro does not publish a price. This page sets out what is publicly known, what third parties report, and what the implementation fee nobody mentions is likely to add. Checked 29 July 2026.
How much does Simpro cost in Australia?
Simpro publishes no pricing at all. Third-party trackers report roughly $150 to $300 per user each month, but you cannot confirm a figure without contacting sales.
Simpro's Australian pricing page carries no dollar figures. There is no plan table, no per-user rate and no starting-from number. The only route to a price is a sales conversation and a demo.
Independent trackers put the range at roughly $150 to $300 per user per month, with entry-level configurations reported from around $30 per user. Treat those as third-party estimates rather than Simpro's own numbers, because Simpro has not published anything to check them against.
Does Simpro charge an implementation fee?
Reported implementation, migration and training costs run $3,000 to $10,000 for small and medium businesses, and above $20,000 for enterprise rollouts.
This is the part that catches people out. Simpro is not a swipe-your-card-and-start product. Third-party sources report implementation, customisation, data migration and training running from $3,000 to $10,000 for an SMB, and past $20,000 for larger deployments, with a two to three month rollout.
That matters when you compare it to anything advertising a low monthly figure. The monthly number is not the cost of getting live. It never was.
Why is Simpro pricing so hard to find?
Pricing sits behind a sales call because the cost depends on user count, modules and implementation scope, which makes a single published number difficult.
There is a defensible reason for it. Simpro sells into everything from a three-person outfit to a large contracting business, and the cost genuinely does move with user count, module selection and how much migration work is involved.
The trade-off is that you cannot compare it to anything without booking a call first. If you are shortlisting three products on a Sunday night, that is a real cost in your time.
How does Rignite compare on price?
Rignite publishes every figure. Calculate is $2,000 setup plus $97 a month, Automate $4,000 plus $399, Complete $8,500 plus $849.
We charge a setup fee too, and we think that is the honest way to sell this. The difference is that ours is on the page.
Our setup fee is the build: your suppliers, your job types, your margins and your templates, configured and handed over working. Compare it to a Simpro implementation, an automation agency, or a part-time estimator, rather than to a monthly subscription that still needs configuring. Pay annually and you save 20%.
Which one suits your business?
Simpro is broad field-service and job management software. Rignite is narrower and deeper: it automates quoting and estimating specifically, built around your existing process.
These are not the same product. Simpro runs scheduling, job management, inventory and field service across a whole operation. If that is the problem you have, it is a serious tool.
Rignite does one part of the job properly. It takes plans or job details, runs the take-off, chases supplier pricing, writes the scope of works and compiles the quote. If quoting is what is eating your evenings, that is the narrower problem we solve.
What should you ask before signing anything?
Ask for the implementation fee in writing, the per-user rate at your headcount, what migration costs, and what happens to the price when you add a user.
Four questions worth asking any vendor in this category, including us. What is the total first-year cost, not the monthly figure. What does implementation cost and what is included. Is the price per user, per job, or flat. And what happens to that number in twelve months when the team grows.
Any vendor that will not answer those in writing before you sign is telling you something.
Where Rignite fits
Sources and last checked
Simpro Pricing in Australia: What It Actually Costs
Simpro does not publish a price. This page sets out what is publicly known, what third parties report, and what the implementation fee nobody mentions is likely to add. Checked 29 July 2026.
How much does Simpro cost in Australia?
Simpro publishes no pricing at all. Third-party trackers report roughly $150 to $300 per user each month, but you cannot confirm a figure without contacting sales.
Simpro's Australian pricing page carries no dollar figures. There is no plan table, no per-user rate and no starting-from number. The only route to a price is a sales conversation and a demo.
Independent trackers put the range at roughly $150 to $300 per user per month, with entry-level configurations reported from around $30 per user. Treat those as third-party estimates rather than Simpro's own numbers, because Simpro has not published anything to check them against.
Does Simpro charge an implementation fee?
Reported implementation, migration and training costs run $3,000 to $10,000 for small and medium businesses, and above $20,000 for enterprise rollouts.
This is the part that catches people out. Simpro is not a swipe-your-card-and-start product. Third-party sources report implementation, customisation, data migration and training running from $3,000 to $10,000 for an SMB, and past $20,000 for larger deployments, with a two to three month rollout.
That matters when you compare it to anything advertising a low monthly figure. The monthly number is not the cost of getting live. It never was.
Why is Simpro pricing so hard to find?
Pricing sits behind a sales call because the cost depends on user count, modules and implementation scope, which makes a single published number difficult.
There is a defensible reason for it. Simpro sells into everything from a three-person outfit to a large contracting business, and the cost genuinely does move with user count, module selection and how much migration work is involved.
The trade-off is that you cannot compare it to anything without booking a call first. If you are shortlisting three products on a Sunday night, that is a real cost in your time.
How does Rignite compare on price?
Rignite publishes every figure. Calculate is $2,000 setup plus $97 a month, Automate $4,000 plus $399, Complete $8,500 plus $849.
We charge a setup fee too, and we think that is the honest way to sell this. The difference is that ours is on the page.
Our setup fee is the build: your suppliers, your job types, your margins and your templates, configured and handed over working. Compare it to a Simpro implementation, an automation agency, or a part-time estimator, rather than to a monthly subscription that still needs configuring. Pay annually and you save 20%.
Which one suits your business?
Simpro is broad field-service and job management software. Rignite is narrower and deeper: it automates quoting and estimating specifically, built around your existing process.
These are not the same product. Simpro runs scheduling, job management, inventory and field service across a whole operation. If that is the problem you have, it is a serious tool.
Rignite does one part of the job properly. It takes plans or job details, runs the take-off, chases supplier pricing, writes the scope of works and compiles the quote. If quoting is what is eating your evenings, that is the narrower problem we solve.
What should you ask before signing anything?
Ask for the implementation fee in writing, the per-user rate at your headcount, what migration costs, and what happens to the price when you add a user.
Four questions worth asking any vendor in this category, including us. What is the total first-year cost, not the monthly figure. What does implementation cost and what is included. Is the price per user, per job, or flat. And what happens to that number in twelve months when the team grows.
Any vendor that will not answer those in writing before you sign is telling you something.